How to play pokemon reborn with a controller (tutorial)

[ff9alex]

1. You will need to download this program called xpadder http://xpadder.com/

you can download it from the official website.

2. Open it and lets start to configure if you have any problem opening the file becuase you use windows 10 : Right click / Properties / Security / Run compatibility as windows 7

3. Find your controler there is a list with several controllers from genious, to ps4, to xbox one, to 360 an many more. this will be an image only you will have to add each button.

4. Press buttons on your controller to make them appear over the image and place them accordinly in the image and hit ok ( see example bellow)

http://postimg.org/image/l56jv3ia3/

5 we are almost done, Now lets configure accordinly to reborn controlers clicking over the buttons and selecting the keyboard key we want to emulate, you can even emulate mouse movement with the joystick but its not necesary for playing reborn. See the image bellow for a reference and how to configure.

http://postimg.org/image/czgbj6ucz/

Reborn controllers : Up, Down, Left, Right - A ( mega evolve - ride tauros) - Z accept/ action button - X back button - S toggle run - alt+enter full screen - Shift register button byke and stuff like the old good rod - D quicksave - F1 configuration of reborn

6 Save and get use to your config and have fun!

as i use (recommend) an Xbox 360 controller i will add the link bellow with my configuration.

http://s000.tinyupload.com/?file_id=08892623371883214771

If you still find it hard to understand how to configure it i recomend watching this video to get an idea ( the guy uses different buttons that you need to play reborn though but the idea is the same)

Edited September 23, 2016 by ff9alex