Nefalem Posted April 20, 2014 Share Posted April 20, 2014 You won't guess how i got the colors for that family Link to comment Share on other sites More sharing options...
Vinny Posted April 20, 2014 Share Posted April 20, 2014 (edited) Should i ask? I'll refrain from doing so. ^^ EDIT: ...you... i'm not even going to say anything To do the spoiler, that's how you do it: [spoiler~]Thing you write goes here[/spoiler~] Remove the little "~" to do it Edited April 20, 2014 by Vinny953 Link to comment Share on other sites More sharing options...
Nefalem Posted April 20, 2014 Share Posted April 20, 2014 (edited) I swapped the eye colors with the fur colors Sry for letting you ask, but I don't now how to insert spoilers into the edit... ^^' Thanks Vinny. The missing Psyduck: I used the Wigglytuff palette, cause this one has a disinspiring look at all Edited April 20, 2014 by Nefalem Link to comment Share on other sites More sharing options...
Nefalem Posted April 20, 2014 Share Posted April 20, 2014 (edited) Blissey family: Edited April 20, 2014 by Nefalem Link to comment Share on other sites More sharing options...
Nefalem Posted April 20, 2014 Share Posted April 20, 2014 (edited) Arcticuno: Thanks to Freya for this concept. I hope I completed the task. Edited April 20, 2014 by Nefalem Link to comment Share on other sites More sharing options...
Vinny Posted April 21, 2014 Share Posted April 21, 2014 Blissey family: I might be the only person that doesn't like this color on Blissey. I guess it works considering how Reborn is, but i don't know. Blissey was the original, so Chansey and Happiny based on Blissey right? Hmm... While i don't like the colors, i don't have a better idea, so i guess we can keep it. I'm no Amethyst though ^^ Link to comment Share on other sites More sharing options...
ShinxLuver Posted April 21, 2014 Share Posted April 21, 2014 The outlining of the redish color on Chansey looks weird. And the contrast between the two shades of red on Happiny is a little too weak- it doesn't give the correct shadow affect when the shades are so similar. Overall though, I actually do like the coloring, (Sorry Vinny!) That's a vote for and a vote against. But of course, Amethyst gets the final say. ^ ^ Her vote is like 10x times ours, obviously! :3 Link to comment Share on other sites More sharing options...
Nefalem Posted April 21, 2014 Share Posted April 21, 2014 (edited) I might be the only person that doesn't like this color on Blissey. I guess it works considering how Reborn is, but i don't know. Blissey was the original, so Chansey and Happiny based on Blissey right? Hmm... While i don't like the colors, i don't have a better idea, so i guess we can keep it. I'm no Amethyst though ^^ Chansey was the original. Next try: Edited April 26, 2014 by Nefalem Link to comment Share on other sites More sharing options...
Brockze Posted April 21, 2014 Share Posted April 21, 2014 I feel like that's way too white to be ashen. I don't like the colour either, but it kinda makes chansey look like a psycho clown, and that's good. Link to comment Share on other sites More sharing options...
Nefalem Posted April 21, 2014 Share Posted April 21, 2014 (edited) Onix family: Miku Hatsune Farfetch'd: Reference: The missing Venonat: Credit for the colors goes to Thirdbird. Edited April 21, 2014 by Nefalem Link to comment Share on other sites More sharing options...
ShinxLuver Posted April 21, 2014 Share Posted April 21, 2014 That farfetch'd makes me happy. :3 The venonat's coloring looks weird, though, because of how you did the flame effect. Link to comment Share on other sites More sharing options...
Administrators Amethyst Posted April 22, 2014 Author Administrators Share Posted April 22, 2014 This isn't too bad but as it turns out after a discussion on the server, we've decided to go with a different concept entirely, modelling after Dragonair's colours. For the earlier evolutions we'll make them look like normal-dragonite's colours instead, likewise. Mewtwo done Tauros reloaded: It looks like we have the same outline problem with the black on the backsprite. The blacksprite if you will. After a highly scientific experiment, I also think it would look better if we let Tauros keep its eye What about a shiny Lapras in this style ? This is another situation where I think we just have to limit ourselves to recolours Rat family done Jinx family done But it looks badass Maybe I'm doing it ... Fearow family: What if reverse the current red and teal parts? Since I think it's usually the heads that are pink on vultures Paras done I do the darker Wigglytuff for you. Edit: Done. Ame you it's your turn Darker is great Can we just take down that lightest shade on jiggly and iggly fronts though? It looks like someone's shining a spotlight on them Psi-yi-yi-- ...done? Articuno done Touching up the bottom of blissey back. It's just one shade though, so good as done Onix family: The missing Venonat: Credit for the colors goes to Thirdbird. We're going to do something spiffier with Steelix, but that's for a different day. With Venonant... Yeah, it's the top that's a-- thing. In both sprites, that orange shade needs to be made lighter (I fixed this up in venomoth's from what was posted as well). By "that orange shade" I mean the one in the highlight on the back, and around the yellow as an outline on the front. You can keep using it as a yellow for the outline, but on the places where it's currently used for an outline and the yellow does not directly touch, use a darker shade. Then, on both the front and back, try drawing in some extra of that orange below the yellow tips to 'fade' into it Link to comment Share on other sites More sharing options...
Nefalem Posted April 22, 2014 Share Posted April 22, 2014 (edited) Tauros. The blacksprite became a blanksprite: No I used the Cape Vulture for reference: Fronts darkened: Since a few too much shiny's became cyan colored I decided to give Growlithe another look: Welcome the Houndithe This fuzzy ball is angry: Kaputo family: Credit for the colors of Kaputo family, goes to Flux. I made the backsrpites. Edited April 23, 2014 by Nefalem Link to comment Share on other sites More sharing options...
Brockze Posted April 22, 2014 Share Posted April 22, 2014 That vulture has white hair and black beak/talons, while your Fearow has green hair and red beak/talons. ? The houndithe looks pretty good, but the bracelet furthest away from the viewer looks a bit dodgy... Link to comment Share on other sites More sharing options...
Nefalem Posted April 22, 2014 Share Posted April 22, 2014 (edited) @ Jacze the reference for Fearow was this tiny sprite of a vulture I've found: Porygon RBY series addition: Fearow family reversed: Bird Jesus family: Starly Palette ALL HAIL BIRD JESUS: Edited April 23, 2014 by Nefalem Link to comment Share on other sites More sharing options...
dragon-in-night Posted April 23, 2014 Share Posted April 23, 2014 (edited) Ok my first try with my favorite common bird Inspired from red crowned crane. I know you want vulture theme but I think fearow look good in this color. If you want I can re do with color of egyptian vulture. Edited April 23, 2014 by dragon-in-night Link to comment Share on other sites More sharing options...
Nefalem Posted April 23, 2014 Share Posted April 23, 2014 (edited) @Dragon-in-Night: Do it Starmie family: Reversed the colors and clued a Staryu on it's back Stardude Mecha mecha Robo Pinsir: Edited April 24, 2014 by Nefalem Link to comment Share on other sites More sharing options...
Calvius Posted April 23, 2014 Share Posted April 23, 2014 Wow. 2 weeks gone for holidays, and that are way more sprites then before in this thread Anyways, it doesn't seem like the Nidomech-thing got to an end, so I might as well continue it here. Basically the idea I had before, but with little rework, fixing some mistakes, deleting the 1 pixel thingies and added some shading details. And, I said, why not, so here is my 5-minute Starmy. Don't know if thats the order of colors you want to have. I personally am not sure what to think of this (I think I like the original better), but see for yourself: Link to comment Share on other sites More sharing options...
Brockze Posted April 23, 2014 Share Posted April 23, 2014 (edited) I find the crane one really offputting. I don't know why, it just irks me. I prefer Nef's version. Edited April 23, 2014 by Jacze Link to comment Share on other sites More sharing options...
Bazaro Posted April 23, 2014 Share Posted April 23, 2014 The thing with the crane Fearow is that the shadings are hard to see, leaving too much contrast. The front and back sprite also don't use the same colors and shades Link to comment Share on other sites More sharing options...
Nefalem Posted April 24, 2014 Share Posted April 24, 2014 (edited) Here is your Vulture Fearow: After hours outlining the picture Valencia Island Vileplume Edited April 24, 2014 by Nefalem Link to comment Share on other sites More sharing options...
dragon-in-night Posted April 24, 2014 Share Posted April 24, 2014 (edited) Fix a bit, I finally find a way to copy color, they all use the same colors and shades now. Edited April 24, 2014 by dragon-in-night Link to comment Share on other sites More sharing options...
Nefalem Posted April 24, 2014 Share Posted April 24, 2014 (edited) Fix a bit, I finally find a way to copy color, they all use the same colors and shades now. Unfortunately they aren't usable at all. Unfortunately they aren't usable at all. A bit darker than the usual shiny sprite of Ekans: Your evil Cubone line: Nockchan and Kicklee: Inspired by: Pinkan Island Dudou family: Coming soon: Edited April 26, 2014 by Nefalem Link to comment Share on other sites More sharing options...
Brockze Posted April 26, 2014 Share Posted April 26, 2014 The hazmat symbol on the arbok looks a bit dodgy on the bottom... Unless you want it to look like a mouth, in which case it's good. I like the colours too. Link to comment Share on other sites More sharing options...
Nefalem Posted April 26, 2014 Share Posted April 26, 2014 (edited) It is a Mouth Yin Yang Lapras: Shellder family: Edited April 26, 2014 by Nefalem Link to comment Share on other sites More sharing options...
Recommended Posts